Floating Candle
& Soap Kits

FLOATING CANDLE INSTRUCTIONS

Open the floating candle mold package and find:

• Two-part polyurethane mold with two locator pins
• One part has small wicking hole in middle
• One part has larger pouring hold in middle
• Wicking material

We recommend using a cake pan, cookie sheet or other flat metal surface, then:

• Step 1 – Insert wick material through the flat bottom side of the mold.
• Step 2 – Line up the two locator pins and put the two halves of the
  mold together. Set the entire mold flat. The wicking material is now visible
  through the pouring hole on the top side of the mold.
• Step 3 – Make certain the wick is centered. You may want to hold the wick with some form of gripper (not your fingers).
• Step 4 – Pour your wax into the pouring hole. Fill the mold to the top.
• Step 5 – Allow the candle to cool in the mold. (After about 30 minutes you
  may want to pour additional wax for flattest results.) Hint: cool the candle
  in your refrigerator.
• Step 6 – When cooled, separate the two parts of the mold. Be careful. The
  candle comes out very easily. Do not drop it.
• Step 7 – You are now holding your new floating candle. Just cut the wick to
  the required size, and ENJOY YOUR NEW CANDLE!!!